Hmong Coin Purse Tutorial
January 31, 2015
One thing I don’t like about California is that A LOT of shops take cash only. While in California I’ve gone to the bank or ATM to get cash more than I have in the east coast altogether. When paying with cash, you end up with tons of COINS so a coin purse is much needed. I have some time (couldn’t sleep) the other night so I made myself one. Hopefully the photos and steps are easy and clear enough to follow.
Materials: 2 pieces of decorative fabric, 2 piece of plain fabric for lining, zipper
Cut all the fabrics to the same size. I used a left over Hmong trim. I think it was about 4″ by 5.25″. It’s best if you use a zipper just a little longer than the length of the fabric, but you can use whatever length zipper you have on hand and just cut it afterwards.
Unzip the zipper. Pin the decorative or outside fabric to the zipper according to the photo below. Sew between the edge of the zipper and the teeth, make sure to back stitch. Do the same to the other piece of the decorative fabric to the other side of the zipper.
Once you’re done sewing the two decorative pieces onto the zipper, it should look like the photo below.
On the bottom side of the zipper, pin the lining fabric according to the photo below. It should sit exactly above the decorative fabric. Sew between the edge and teeth of the zipper. Do the same to the other piece of the lining to the other side of the zipper.
Once you’re done sewing the lining onto the zipper, it should look like the photo below with.
Move the lining fabric away from the decorative fabric and top stitch the decorative fabric. This will make the top fabric stay on the zipper with a cleaner look. Only the lining should lay on the left, the decorative fabric and seams should be laying on the right. Sew through the decorative fabric and seams close to the edge.
Make sure the zipper is opened at least half way if not a little more. This step is important because you will need to turn the coin purse through the opening of the zipper.
Pin the right sides of the decorative and lining fabrics together like the photo below. The zipper is hiding in the middle; make sure the zipper teeth and ends match up. Sew all the way around, but leave an opening at the bottom of the lining shown below with a white line. Remember to back stitch. You need to keep the bottom open and big enough so you can stick your fingers through the opening and opened zipper and turn it inside out. Once you’re done sewing, if your zipper is longer than the fabric, you can now cut it.
Once you turn it inside out, it’ll look like the photo below.
Tuck in the seams on the opening of the lining and sew close the the edge. Make sure to back stitch. Push in the lining and you’re done! Add cute accessories to the zipper handle if you want to.